Msi afterburner settings5/17/2023 So make sure your PC casing is well ventilated with decent airflow.ĪfterBurner 3.0.0 (to be released) comes with GPU and memory tuning, overvolting, allowing control and adjustment parameters for overclocking.įor a regular (mild) tweak/overclock you could do something like above. That backside of your graphics card however gets hot as well, give it some airflow too. Cooling helps with overclocking, it's as simple as that. If you are willing to allow more noise, increase the fan RPM on the GPU towards a higher setting that you find comfortable. Once you get artifacts or a lockup, back down 25 to 50 MHz and typically that is your stable result in it's highest threshold - under the condition that the room temperature is the same (yes GPU heat and surrounding heat have an influence on your overclock). Related to heat is your graphics card cooling system. In the first stage you overclock your GPU, in the second the memory. First off let us remind you that we always recommend increments of roughly 25 MHz on core and memory (from the default base clock frequency upwards). ![]() When you want to overclock typically you need to verify and stabilize your tested settings. ![]() ![]() So before we begin to explore the new options, first this: the 'old way' of overclocking still is possible, in reality this would be what is referred to as basic mode, yet managed by the sliders that you guys all know and like.
0 Comments
Leave a Reply. |